The ProLine® Standard electric water heater is a reliable choice when you are looking to maximize your hot water output and is designed with environmentally-friendly insulation to reduce standby heat loss.
With a 50-gallon (nominal) tank producing 6,000 watts, the EN6-50-DORT delivers a first hour rating of 62 gallons and a recovery rate of 21 gallons per hour. With an 0.92 Uniform Energy Factor, this water heater is not ENERGY STAR® qualified. It carries a 6-year limited tank warranty.
Type |
: |
Electric |
Application |
: |
Electric Tank |
Tank Capacity |
: |
50 Gal |
Tank Size |
: |
Tall |
Rated Storage Volume |
: |
46 Gal |
First Hour Rating |
: |
62 Gal |
UEF |
: |
0.92 |
Number of Elements |
: |
2 |
Power Source |
: |
Electric |
Voltage Rating |
: |
208/240 VAC |
Amperage Rating |
: |
30 A |
Breaker Size |
: |
30 A |
Phase |
: |
Single |
Diameter |
: |
20-1/2 in. |
Product Weight |
: |
125 lbs |
Warranty |
: |
6 Years |
Anode |
: |
Coregard™ Sacrificial Anode |
Lower Element Wattage |
: |
4500 W |
Recovery Gallons |
: |
21 Gal |
Self Cleaning |
: |
Yes |
Upper Element Wattage |
: |
4500 W |
Water Connection Location |
: |
Top |
Water Connection Size |
: |
3/4 |
- ENHANCED HEATING ELEMENTS
- Dual 4500 watt elements for faster recovery and reliable operation*
- Incoly stainless steel lower element lasts longer than a standard copper element
- SELF-CLEANING DIP TUBE
- Helps reduce lime and sediment buildup, maximizes hot water output. Made from long-lasting PEX cross-linked polymer (self-cleaning design is not used on lowboy models).
- HIGHER EFFICIENCY
- Eco-friendly non-CFC foam insulation, heat traps and other features combine to yield a higher Uniform Energy Factor that maximizes savings on operating costs
- COREGARD™ ANODE ROD
- Our anode rods have a stainless steelcore that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods
- BLUE DIAMOND® GLASS COATING
- Provides superior corrosion resistance compared to industry-standard glass lining
- ENHANCED-FLOW BRASS DRAIN VALVE
- Our residential water heaters have a solid brass, tamper resistant, enhanced-flow, ball type, drain valve
- Uses a standard female hose fitting that allows for fast and easy draining during maintenance
- Designed for easy operation, this valve includes an integral screwdriver slot that features a ¼ turn (open/close) radius, which not only permits full straight through water flow but also a quick and positive shut off.
- CODE COMPLIANCE
- Meets UBC and ICC National Codes and listed with CEC
- Complies with the Federal Energy Conservation Standards effective April 16, 2015, in accordance with the Energy Policy and Conservation Act (EPCA), as amended.
- APPROVED FOR MANUFACTURED HOUSING
- All residential electric water heaters are compliant with HUD Standards for mobile homes/manufactured housing
- CERTIFIED TO UL 174 FOR HOUSEHOLD ELECTRIC WATER HEATERS CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE DESIGN-LISTED BY UNDERWRITERS LABORATORIES
- Certified at 300 psi test pressure and 150 psi working pressure
- Listed according to UL 174 standards governing storage tank-type electric water heaters
- 6-YEAR LIMITED TANK AND PARTS WARRANTY
- For complete information, consult written warranty or go to statewaterheaters.com